Ser du noget at forbedre? Foreslå en ændring.
The Apollo Command Module's primary source of electric power was from a set of three "fuel cells" housed in the Service Module. Each fuel cell combines hydrogen and oxygen to produce electricity and water. The water was used for drinking by the astronaut crew. Each of the fuel cell power plants contain 31 separate cells connected in series. Each cell has hydrogen and an oxygen compartments and electrodes, which in combination produce 27 to 31 volts. Normal power output for each power plant is 563 to 1420 watts, with a maximum of 2300 watts.
This particular fuel cell was installed in Service Module (SM) 102 during ground testing and operations conducted at the module's North American Aviation manufacturing site in California. It was transferred to the Smithsonian in September 1972. SM-102 was not flown.
| Manufacturer | United Aircraft Corporation, Pratt & Whitney Aircraft Division |
| Country of Origin | United States of America |
| Materials | Pressure Jacket/Support Assembly: Titanium, Stainless Steel, Nickel Hydrogen Electrode: Nickel Oxygen Electrode: Nickel and Nickel Oxide |
| Dimensions | 3-D: 111.8 x 55.9cm, 111.1kg (44 x 22 in., 245lb.) |
| Credit Line | Transferred from the National Aeronautics and Space Administration |
| Inventory Number | A19730934001 |
Where this page came from
This page was imported from Smithsonian National Air and Space Museum. Released by the Smithsonian Institution under CC0 through Smithsonian Open Access.
Nobody has written it yet — it is the source material at a new address, which is why search engines are asked to skip it and why no one earns from it. It is up for grabs: take it on, and it is yours to rewrite and to earn from.
Licens: CC0 1.0 (offentligt eje) · Bearbejdet efter n2t.net
1
0
0
0
Kommentarer
