Fish Hook Extractor

In many parts of the world, fishing is a very large part of life, as a plentiful source of both food and income to many people. A fish hook extractor tool aids a fisherman in removing hooks from a fish's mouth with ease and speed, especially when a hook has been lodged deep within the fish or in a difficult spot to reach with one's hand. It also helps a fisherman by retrieving hooks that would have otherwise been lost to the fish. Additionally, it is an incredibly helpful tool in cold temperatures, where the fisherman will not have to remove a glove in order to remove the hook from a fish's mouth.

This tool is an OSAT, as it contributes to various sustainable development goals such as 2) Zero Hunger and 8) Decent Work & Economic Growth. It allows fisherman to spend their time more efficiently, fish for longer periods of time, catch more fish, use fewer hooks, and cut down on the risk of injury. This means more fish are being used to feed hungry people or sell/trade for economic gain.

3D model of tool

Final printed fish hook extractor

Bill of Materials

• Approx. 10 g PLA filament: $0.28
• Hook extractor STL file (OpenSCAD file also available for modifications)

Youmagine Page - contains OpenSCAD and STL files

Tools Needed for Fabrication

• MOST Delta RepRap or similar RepRap 3-D printer

Skills and knowledge needed

Knowledge of OpenSCAD may be helpful to modify the design in any way seen fit. Aside from this, one must simply know how to import the STL file into a slicer program and run the resulting g-code on a 3D printer of their choice.

Technical Specifications and Assembly Instructions

• The fish hook extractor requires zero assembly. Simply remove the tool from the printer when it has completed, remove all support structures created, and it will be good to go. It may help to perform some sanding/smoothing in order to make the tool more comfortable to hold and work with.
• Print time estimate: 2.5 hrs
• Assembly time: None

Print Parameters:

• Fill density: 50%
• Layer height: 0.1 mm
• Print speed: 70 mm/s
• Support/platform adhesion: None needed

Common Problems and Solutions

• Since this print is quite tall and thin, ensure that the printer will not "park" itself at too low of a position (or at all) at the end of the print. This could cause the top of the tool to become pushed in/warped.

Usage

To use this tool, thread the fishing line into the slit on either side, depending on whether the fish has a larger or smaller mouth. Follow the line into the fish's mouth with the head of the extractor until it hits the hook. While pushing forward slightly and keeping the line taut, twist the extractor until the fish hook has been disgorged. Pull the entire device out of the fish's mouth, hook and all!

Cost savings

• Estimated cost: ~$0.28
• Commercial equivalent: $2.19 at Bass Pro Shops
• $ savings = $1.91 per tool
• % savings = 87%

References[1][2]

• ↑ Web page: Bass Pro Shops Fish Hook Disgorger (2006) Available: http://www.basspro.com/Bass-Pro-Shops-Fish-Hook-Disgorger/product/31852/?hvarAID=shopping_googleproductextensions
• ↑ Web video: Hookout Fish Holder (2015) Available: https://www.youtube.com/watch?v=_VSIJ_E2n1A

Where this page came from

This page was imported from Appropedia. “Fish Hook Extractor” from Appropedia, by its contributors, under CC BY-SA 4.0. Changed here: set as a page; the project databox, notices and edit links left out; each photo under its own licence, credited in its caption.

Nobody has written it yet — it is the source material at a new address, which is why search engines are asked to skip it and why no one earns from it. It is up for grabs: take it on, and it is yours to rewrite and to earn from.