Singer model 66 treadle sewing machine and motor from the Rock Rest Tourist Home

A Singer model 66 sewing machine with a BZ 15-8 Singer motor from the Rock Rest Tourist Home. The treadle sewing machine is coated with black paint and embellished with floral, tendril, and foliate designs. Painted across the top of the arm is the name of the manufacturing company, [The Singer Manufacturing Co.], in Old English font gold text. The name, [SINGER], has also been painted in large gold text on the front side of the machine, and is capped on either side by "Red Eye" designs; a red elliptical shape framed with laurel wreaths on the top and bottom and accented green. At the top of the upright arm is a red, green, and gold tendril design that swirls around a gold star shape with five fleur-de-lis points. At the center of the upright arm, just below the stitch regulator, is an ovular brass badge attached with two small screws with the Singer shuttle, needle, and thread logo embossed on the front. Below the badge is an additional "Red Eye" design embellished below by a tendril and leaf design. The back side of the sewing machine is plainer with only the text [SINGER] across the arm and accented on one side with a "Red Eye" design. The balance wheel is silver with black spokes and a gold center plate. Attached to the needle end of the sewing machine arm is a silver tone face plate ornately etched with a vignette fleur-de-lis and tendril design. On the machine’s bed is a slide plate with one squared side and a D-shaped needle plate. The bed features a large roughly diamond-shaped design at the center with a gold and green cross at the center of a larger "Red Eye," inside an ornate gold frame accented with four petal flowers, leaves, and tendrils. Three edges of the bed are similarly embellished with the "Red Eye" design and gold bars, tendrils, and flowers. On the bed, just below the front of the vertical arm, is a brass plate with a stamped serial number that reads [G8539711]. Behind the balance wheel is a black rubber belt, stamped [SIMANCO 193066], attached to the motor on the back of the machine. On the front of the motor is a black plate with silver text and a large red and silver S-shaped Singer logo at the center. The text at the top of the plate reads [SINGER]. Text below on the left side reads [SEWING / CAT. BZ 15-8 / S. S. AU 52-38-24 / THE SINGER MFG. CO. / ELIZABETHPORT, N.J. / SIMANCO]. Text below on the right side reads [110-120 VOLTS / 0.53 AMP. / 25-75 CYC. & D.C. / MADE IN U.S.A.]. Vertical text along the right side reads [G 1602-20]. Attached to the motor is a black power cord for a black pedal. On the bottom of the pedal is another black plate with silver text and a large red and silver S-shaped Singer logo at the center. The text at the top of the plate reads [SINGER / SEWING MOTOR CONTROLLER]. Text below on the left side reads [VOLTS / 95-145 / AMPERES / 0.7 / PART NO: 196131]. Text below on the right side reads [THE SINGER MFG. CO. / ELIZABETHPORT, NEW JERSEY / SIMANCO / MADE IN U.S.A.]. Vertical text along the right side reads [287-48]. There is a small, black plastic Singer lamp with cord with a Belden plug attached to the machine above the motor.

Where this page came from

This page was imported from Smithsonian National Museum of African American History and Culture. Released by the Smithsonian Institution under CC0 through Smithsonian Open Access.

Nobody has written it yet — it is the source material at a new address, which is why search engines are asked to skip it and why no one earns from it. It is up for grabs: take it on, and it is yours to rewrite and to earn from.