Wright Cyclone P-1, Radial 9 Engine

About the middle of 1923, the U.S. Navy signed a contract with Wright Aeronautical for three large air-cooled engine designs, which were to be built successively. The first of these, based on a design proposed earlier to the U.S. Army by Charles Lawrance, was known as the P-1, and was the direct forerunner of the highly successful Wright Cyclone series of engines. In order to reduce aerodynamic drag, its design was limited to a frontal area no greater than that of the Navy's Lawrance J engine, despite the fact that the P-1 had twice the displacement.

The P-1 was tested extensively in 1924 in a Douglas DT-2 aircraft, and flown successfully in the Navy Douglas DT-6 and Boeing aircraft. However, magnesium alloy castings, being used for the first time, failed in endurance tests. The P-1 was then discontinued in favor of the larger P-2, which added Heron-type cylinders and a supercharger.

• Type: Reciprocating, 9 cylinders, radial, air cooled
• Power rating: 303 kW (406 hp) at 1,650 rpm
• Displacement: 27.1 L (1,654 cu in.)
• Bore and Stroke: 152 mm (6.0 in.) x 165 mm (6.5 in.)
• Weight (dry): 368 kg (812 lb)

Where this page came from

This page was imported from Smithsonian National Air and Space Museum. Released by the Smithsonian Institution under CC0 through Smithsonian Open Access.

Nobody has written it yet — it is the source material at a new address, which is why search engines are asked to skip it and why no one earns from it. It is up for grabs: take it on, and it is yours to rewrite and to earn from.