Wright XR-2120, Radial 12 Engine, Cutaway

In the early 1930s, the Navy supported Wright development of two new liquid-cooled engines, the XR-2120 (H-2120) and the V-1800. This was part of a "high-speed development program" undertaken by the Navy because of concern over the growing superiority of foreign airplanes in top speed, especially as demonstrated in the 1929 Schneider Trophy contest and again in 1931.

First of the two engines and derived from the Curtiss H-1640, it was anticipated that the XR-2120 design, with liquid cooling and enlarged cylinders, would make a good racing engine. The small diameter of the engine, considered important for drag reduction, proved to be difficult to develop due to excessive angularity of the connecting rods and other problems. The Navy withdrew support from the project, primarily because it decided to focus on the development of air-cooled engines. Convinced that the design was mechanically poor, Wright made little effort to persuade the Navy to change its decision and dropped the project.

• Type: Reciprocating, 12 cylinders, 2 rows, radial, liquid cooled
• Power rating: 746 kW (1,000 hp) at 2,400 rpm
• Displacement: 34.7 L (2,120 cu in.)
• Bore and Stroke: Not available
• Weight: 544 kg (1,200 lb)

Where this page came from

This page was imported from Smithsonian National Air and Space Museum. Released by the Smithsonian Institution under CC0 through Smithsonian Open Access.

Nobody has written it yet — it is the source material at a new address, which is why search engines are asked to skip it and why no one earns from it. It is up for grabs: take it on, and it is yours to rewrite and to earn from.