Progress Report with Photos: Restoration of NIST's Million-Pound Deadweight Machine

A restored component of the million-pound deadweight machine being returned to NIST in June.

Restoration is well underway for NIST's 4.45-million newton (equivalent to one million pounds-force) deadweight machine, the largest in the world. The three-story-tall deadweight, comprising a stack of stainless steel discs weighing about 50,000 pounds each, was disassembled last winter for the first time in fifty years.*

The surfaces of a half dozen components of the deadweight recently underwent minor machining at NIST and by a company offsite, to permit more free operation at those interfaces. Pieces that were sent offsite returned to NIST in June fully restored.

The final task remaining before reassembly is recalibration of the approximately 50,000-pound discs.

Force measurements require an accurate assessment of mass. Since the international standard for mass is the kilogram (kg), PML staff members begin their calibrations with standard masses of this size (1 kg is slightly more than 2 pounds). They then work their way from 1 kg weights to standard weights that are tens of thousands of pounds, making a continuous chain of mass comparisons using progressively larger standards.

This recalibration process began in late spring and will take several weeks to complete.

Built in 1965, NIST's million pounds-force deadweight system consists of a calibrated lifting frame and a stack of 19 stainless steel discs about three meters in diameter (a little less than ten feet) when assembled. Their average mass is about 22,696 kg (just over 50,000 pounds) each.

Customers who rely on this unique machine include US aerospace manufacturers, US military laboratories, and several top-end commercial force calibration labs, which have performed hundreds or thousands of calibrations, all directly traceable to NIST.

The NIST million-pound deadweight system is expected to be back online this year.

See below for additional photos depicting the recent machining of several components of the weights and their return to NIST. Any mention of commercial products or companies within NIST web pages is for information only; it does not imply recommendation or endorsement by NIST.

*See "Restoration Begins on NIST's Million-Pound Deadweight Machine." January 27, 2015.

--Reported and written by Jennifer Lauren Lee

BEFORE: Restoration was required to repair galling near the bottom of the conical "donut hole" in the middle of this weight.

Lowering a restored component off of the truck. The four pieces that were machined offsite are approximately 1.83 meters (about 6 feet) in diameter and weight approximately 3,674 kg (about 8,100 pounds) each.

AFTER: Shining restored surface of one of the weights sent offsite for minor machining.

NIST's 4.45-million newton (one million pound) deadweight machine when fully assembled.

Where this page came from

This page was imported from National Institute of Standards and Technology. Published by the National Institute of Standards and Technology and, as a work of the United States government, in the public domain; pictures credited elsewhere are left out.

Nobody has written it yet — it is the source material at a new address, which is why search engines are asked to skip it and why no one earns from it. It is up for grabs: take it on, and it is yours to rewrite and to earn from.